These air dryer guns work with water-borne paints in particular, but also solvent-based materials can be dried rapidly by blowing air at the coated surface. They are especially suitable for the dry-blowing of smaller surfaces such as doors or fenders.
The compressed air required for the dry-blowing is supplied at the air connection. By opening the inline air regulator, the blowing process is initiated. The air streaming through the specially shaped blowing slits causes an under pressure which sucks in further air in the area of the filter holder. The sucked in air is cleaned by the stainless steel sieve.
-Increases airflow 10:1
-Adjustable Inline Air Regulator
-Maximum pressure: 98 psi
-Working Pressure: 43 psi
-Weight: 9.34 oz
-Air Consumption: 7 cfm
-Holds two air dryer guns
-Dryer guns can be rotated and locked in any position
2 Composite Air Dryer Guns